Fix Disk Management Not Working in Windows 11

One of the helpful tools included with the Windows operating system is disc management by which we know here How To Fix Disk Management Not Working in Windows 11, which manages all storage-related operations including resizing or formatting a hard drive partition. Users have reported that they are having problems with the tool after upgrading to Windows 11, even though it functions properly on earlier versions of Windows.

The majority of users have reported that the application frequently crashes or becomes sluggish, rendering it unfit for usage. No matter what problems you are having with disc management, you may use the techniques listed in this troubleshooting article to get things back to normal.

Fix Disk Management Not Working in Windows 11

The following Methods will let will troubleshoot the disk management-related problems hogging your Windows 11 PC.

1. Disconnect Peripheral devices

Hardware and other peripheral devices are to fault if Disk Management fails or takes an eternity to load when requested to load the disc settings. So please take a time to ensure that the hardware and external devices are functioning as needed before we begin using the software-related troubleshooting techniques.

Keep the problematic device unplugged permanently until you can identify who is to blame for the disc management problem and find a replacement.

2. Use Command Prompt

The Command Prompt can assist you in launching the Disk Management tool on your Windows 11 computer if you are unable to do so through the search menu or through the Run dialogue box. Following are the instructions for starting Disk Management from a Command Prompt:

1. Press the Windows key to open the Start menu.

2. In the search box, type cmd. To start Command Prompt in Administrator Mode, select the Run As Administrator option.

Command Prompt

 

3. Type the following command into the command prompt when it appears, then hit the Enter key to execute it.

Diskmgmt.mse                                                                          

Disk Management

Hopefully, this will now open the Disk Management window.

3. Set up essential Windows services

When attempting to utilise the Disk Management tool, you may see the error message “Unable to Connect to Virtual Disk Service.” This can be caused by incorrectly configured Windows services, which have a direct impact on how disc management functions. You need to set these Windows services back to their original configurations in order to resolve the issue you’re now experiencing. Here is the procedure, in step-by-step fashion:

1. To open the Run dialogue box, press Windows + R on the keyboard.

2. In the text box, type services.msc and press the Enter key.

windows services

 

3. Locate the Remote Access Connection Manager service in the services window and double-click to open the Properties window.

 

Remote Access Connection Manager

 

4. Expand the Startup Type drop-down and pick the Automatic or Manual option. Now hit the Apply button followed by OK to save the changes.

Automatic Startup Type

4. After this, look for the Remote Access Auto Connection Manager service, Storage Service, Virtual Disk, and Storage Tiers Management Service and perform the same step for each of them.

Once you’ve made the necessary changes, reboot your Windows 11 PC and try to access the Disk Management Tool once again.

4. Scan Hard Disk

If the above methods could not alleviate the problem, there is a good chance that there may be something wrong with the hard drive of your Windows 11 PC. In this case, you can scan the entire disc drive using the Check Disk (chkdsk) command and resolve the underlying software-related problems if you find any. Here is what you need to do:

1. Use the Win and R shortcut combination to launch the Run dialogue box.

2. Type CMD in the command box and use the Ctrl + Shift + Enter key combination to launch the Command prompt in Administrator Mode.

Cmd in Run

3. To start a Check Disk scan, type or copy-paste the command below, then press the Enter key.

chkdsk C: /f                                                              

Check Disk

4. Restart your computer when the scan is finished, and then try to open the Disk Management programmed.

Quick Tip: If the operating system is installed on a separate disc partition, you can substitute a different letter for C: in the command.

5. Launch the Troubleshooter for Hardware and Devices

The Hardware and Devices Troubleshooter can identify the disk-related issue in your system if you are unable to fix the present problem on your PC. The hardware and device troubleshooter’s execution procedure differs slightly from that of other built-in Windows troubleshooters. Don’t worry; the detailed procedure provided here will enable you to use the Hardware and Devices Troubleshooter regardless of the issue:

1. Pressing the shortcut key Windows + R will open the Run dialogue box.

2. To run the command, write or copy-paste msdt.exe -id Device Diagnostic into the text box and click OK.

Hardware troubleshooter

3. As soon as you do so, the Hardware and Devices troubleshooter window will display in front of you. Hit the Next button.

Press Next button to run hardware troubleshooter

I’m done now! The troubleshooter will now start analysing your Windows computer for potential hardware-related problems and alerting you if it discovers any. You may easily fix the issue with your Windows 11 computer’s hard disc by simply following the on-screen instructions. After that, you may use the same technique you always use to open the Disk Management tool, and hopefully you won’t experience any issues anymore.

6. Windows Update.

There is a significant risk that your device will be running on an outdated version of Windows, which may be rife with bugs, if you frequently keep your Windows update stopped. When using native Windows tools like the one at hand, your PC may continue to have strange issues as a result of this.

Therefore, you should check to see if your computer is running the most recent version of Windows and, if so, apply any updates that are still due. The steps for installing the most recent Windows update are shown below.

1. Use the Windows + I hotkey combination to open Settings.

2. From the left sidebar, select Windows Update.

3. Press the Check for updates button available on the top-right.

3. Select the button that reads “Check for Updates” in the top-right corner.

Check For Windows Update

 

If Windows discovers any updates, it will display a list of them below. To install these updates, click the Download and Install button next to them.

7. Restart the service for Cyberlink Virtual Drive.

Another crucial Windows service that makes it possible for Disk Management tools to function perfectly is Cyberlink Virtual Drive. The Disk Management Tool’s functionality will be immediately impacted if this service encounters an issue and starts to malfunction.

To fix issues with disc management, it is thus recommended to restart the Cyberlink Virtual Drive service. The steps for resuming the Cyberlink Virtual Drive service are shown below.

1. Use the Windows + R keyboard shortcut to open the Run dialogue box.

2. To open the Services window, type services.msc into the text box and press Enter.

Window Services

 

3. Locate the Cyberlink Virtual Drive service and use the right-click context menu to open it.

4. To restart the Cyberlink Virtual Drive service, choose the Restart option.

8. Perform a DISM and SFC scan.

The System File Checker and DISM tools should then be used, since they are useful for troubleshooting the difficulties your PC is now experiencing. The corrupt system files are found by the SFC scan, and they are then fixed. The DISM scan also improves your PC’s general health. Here is how you use the DISM programme to remove the problematic files and conduct the SFC scan step-by-step.

1. Press the Windows + S shortcut key to open the Start menu.

2. In the search box at the top, type CMD, and then select Run as Administrator in the right-hand corner.

Run As

 

3. To launch it, type the following command or copy it and paste it.

sfc /scannow                                                                   

 

SFC Scan

 

SFC will start scanning your Windows computer, and if it discovers any problems, it will let you know right there in the command prompt. You can go on to the DISM scan when the scan is finished. The first steps are as follows:

1. Open the Command Prompt once more in administrator mode. Enter the next command here, then press the Enter key.

DISM /Online /Cleanup-Image /RestoreHealth                                         

DISM

 

Wait until the DISM scan is finished, which might take around 20 minutes. Check to see if disc management is now operational when the scan is complete.

A Conclusion

When you need to execute disk-related tasks, Disk Management—a fundamental feature of the Windows ecosystem—comes in useful. Therefore, when Windows 11’s Disk Management crashes or fails to launch, it is a problem that has to be fixed right away. The likely solutions gathered in this article will assist in quickly and painlessly solving the problem. Which of these tricks did you find effective? Please share with us in the comments area.

6 thoughts on “How to Fix Disk Management Not Working in Windows 11”
  1. Hello there! I know this is kinda off topic but I was wondering if you knew where I could get a captcha plugin for my comment form? I’m using the same blog platform as yours and I’m having problems finding one? Thanks a lot!

  2. It’s really a great and useful piece of info. I’m glad that you shared this helpful information with us. Please keep us up to date like this. Thank you for sharing.

  3. Thanks , I have just been looking for information about this topic for ages and yours is the best I have discovered till now. But, what about the bottom line? Are you sure about the source?

  4. I love your blog.. very nice colors & theme. Did you create this website yourself or did you hire someone to do it for you? Plz respond as I’m looking to create my own blog and would like to find out where u got this from. thanks

  5. F*ckin’ tremendous things here. I am very glad to see your post. Thanks a lot and i’m looking forward to contact you. Will you please drop me a mail?

Leave a Reply

Your email address will not be published. Required fields are marked *